Choose your model
13th Gen F-150 High Clearance Front Bumper Kit
Ford F150
Ford Ford F150 CO76313Product ID: 1548
Mandona
There are many variations of passages of Lorem Ipsum available, but the majority have suffered alteration in some form, by injected humour, or randomised words which don't look even slightly believable. If you are going to use a passage of Lorem Ipsum, you need to be sure there isn't anything embarrassing hidden in the middle of text.
Create an account to put this in your wishlist.
Go to wishlistCreate an account to put this in your wishlist.
13th Gen F-150 High Clearance Front Bumper Kit
Ford F150
Ford Ford F150 CO76313Product ID: 1548
Ships within 3-10 business days with 2 day shipping
Ships within 3-10 business days with 2 day shipping
Choose
your variation
4.6
( 215 Google reviews)
This is a high clearance DIY weld-together bumper kit for the 13th Gen (2015-2017) Ford F150. It features a low profile design, fully bolt-on construction, protected winch mount and the best approach angle on the market. The high clearance design makes your F150 look more aggressive by showing off your front suspension and tires. In addition, this bumper frees up a ton of space in your front wheel wells and allows you to easily run 35" tires without any bumper interference. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your F150. It offers excellent protection from rocks, trees and animal strikes and has been kept to a very reasonable weight of 115lbs (or 57lbs in aluminum) through careful design work. This low weight is especially noteworthy when you consider the weight lost from removing your factory bumper and town hooks - the actual weight difference is minimal and will not have any noticeable affects on your suspension. Build your F150 the right way with true offroad bumpers that maximize its offroad clearance and performance!
This bumper uses a total of 12 factory mounting points to solidly mount it to the frame and is available with an optional integrated skid plate for even more protection and strength. The mounting system distributes impact and winching forces evenly across your frame and makes for the stiffest mounting interface of any bumper on the market. This bumper also uses a low profile design that tucks tightly to the body and slopes up directly from the end of the frame. This results in maximum ground clearance and approach angles that will let you take lines on the trail that weren't previously possible.
The optional lower skid plate protects your vulnerable radiator, front differential and other lower engine bay parts and provides even more additional ground clearance compared to the flimsy stock skid plate. This skid plate also has side "wings" that sit in front of the notoriously exposed and low-hanging front suspension mounts. This will help prevent bent suspension mounts that can throw off your alignment and result in expensive repair bills. As can be seen in the pictures, this skid plate tucks extremely tight to the front end of the vehicle and gives a shocking amount of extra ground clearance where it counts most! Simply put, you will be able to take lines on the trail that previously were not possible with your stock bumper and skid plates. To finish it off, this skid plate has CNC cut outs that improve airflow to the radiator as well as raised sides that stiffen the skid plate and prevent debris from entering the engine bay from the sides.
In addition to the winch mount that accepts all standard 8-12,000lb winches, this bumper comes with 2 locations to mount 3x3" surface mount LED pod lights. These lighting mounts come with slotted mounting tabs that give a ton of adjustability to fit a wide range of different lights.
NOTE: Does NOT fit 2018-2020 front end. At this time, we do not offer a version to fit the 2018-2020 front end style or the factory parking sensor system but please reach out if you'd like to help us make it happen!
DIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent plates that you then weld together (detailed assembly instructions included)
NO Drilling, cutting or welding of the actual vehicle required - this bumper can be installed and removed from your F150 without a trace that it was ever there!
CNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product
Compatible with drop bracket lifts, standard suspension lifts, and body lifts (Optional Skid Plate requires modification for drop bracket lifts)
Low profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 3" from the center of the grill!
Heavy duty 3/16" plate steel construction for maximum offroad strength and durability
Optional 1/4" 5052 aluminum for a lightweight yet very durable overlanding setup (58lb weight savings)
Bolts directly to frame using a total of 12 factory mounting points - no drilling required
Protected winch mount fits all 8000-10,000lb winches with removable solenoids (Also fits some 12,000lb models)
Integrated 9/16" thick clevis mounts maximize clearance and allow the use of ¾” D-Rings
Two Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit just about any 3x3" surface mount pod light
Pre-drilled to mount front license plate
Optional heavy duty grill tubing for added protection
13th Gen F-150 High Clearance Front Bumper Kit
Ford F150 Ford
812.34 $Product ID: 1548
Product overview
This is a high clearance DIY weld-together bumper kit for the 13th Gen (2015-2017) Ford F150. It features a low profile design, fully bolt-on construction, protected winch mount and the best approach angle on the market. The high clearance design makes your F150 look more aggressive by showing off your front suspension and tires. In addition, this bumper frees up a ton of space in your front wheel wells and allows you to easily run 35" tires without any bumper interference. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your F150. It offers excellent protection from rocks, trees and animal strikes and has been kept to a very reasonable weight of 115lbs (or 57lbs in aluminum) through careful design work. This low weight is especially noteworthy when you consider the weight lost from removing your factory bumper and town hooks - the actual weight difference is minimal and will not have any noticeable affects on your suspension. Build your F150 the right way with true offroad bumpers that maximize its offroad clearance and performance!
This bumper uses a total of 12 factory mounting points to solidly mount it to the frame and is available with an optional integrated skid plate for even more protection and strength. The mounting system distributes impact and winching forces evenly across your frame and makes for the stiffest mounting interface of any bumper on the market. This bumper also uses a low profile design that tucks tightly to the body and slopes up directly from the end of the frame. This results in maximum ground clearance and approach angles that will let you take lines on the trail that weren't previously possible.
The optional lower skid plate protects your vulnerable radiator, front differential and other lower engine bay parts and provides even more additional ground clearance compared to the flimsy stock skid plate. This skid plate also has side "wings" that sit in front of the notoriously exposed and low-hanging front suspension mounts. This will help prevent bent suspension mounts that can throw off your alignment and result in expensive repair bills. As can be seen in the pictures, this skid plate tucks extremely tight to the front end of the vehicle and gives a shocking amount of extra ground clearance where it counts most! Simply put, you will be able to take lines on the trail that previously were not possible with your stock bumper and skid plates. To finish it off, this skid plate has CNC cut outs that improve airflow to the radiator as well as raised sides that stiffen the skid plate and prevent debris from entering the engine bay from the sides.
In addition to the winch mount that accepts all standard 8-12,000lb winches, this bumper comes with 2 locations to mount 3x3" surface mount LED pod lights. These lighting mounts come with slotted mounting tabs that give a ton of adjustability to fit a wide range of different lights.
NOTE: Does NOT fit 2018-2020 front end. At this time, we do not offer a version to fit the 2018-2020 front end style or the factory parking sensor system but please reach out if you'd like to help us make it happen!
DIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent plates that you then weld together (detailed assembly instructions included)
NO Drilling, cutting or welding of the actual vehicle required - this bumper can be installed and removed from your F150 without a trace that it was ever there!
CNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product
Compatible with drop bracket lifts, standard suspension lifts, and body lifts (Optional Skid Plate requires modification for drop bracket lifts)
Low profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 3" from the center of the grill!
Heavy duty 3/16" plate steel construction for maximum offroad strength and durability
Optional 1/4" 5052 aluminum for a lightweight yet very durable overlanding setup (58lb weight savings)
Bolts directly to frame using a total of 12 factory mounting points - no drilling required
Protected winch mount fits all 8000-10,000lb winches with removable solenoids (Also fits some 12,000lb models)
Integrated 9/16" thick clevis mounts maximize clearance and allow the use of ¾” D-Rings
Two Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit just about any 3x3" surface mount pod light
Pre-drilled to mount front license plate
Optional heavy duty grill tubing for added protection
Key specifications
This is a high clearance DIY weld-together bumper kit for the 13th Gen (2015-2017) Ford F150. It features a low profile design, fully bolt-on construction, protected winch mount and the best approach angle on the market. The high clearance design makes your F150 look more aggressive by showing off your front suspension and tires. In addition, this bumper frees up a ton of space in your front wheel wells and allows you to easily run 35" tires without any bumper interference. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your F150. It offers excellent protection from rocks, trees and animal strikes and has been kept to a very reasonable weight of 115lbs (or 57lbs in aluminum) through careful design work. This low weight is especially noteworthy when you consider the weight lost from removing your factory bumper and town hooks - the actual weight difference is minimal and will not have any noticeable affects on your suspension. Build your F150 the right way with true offroad bumpers that maximize its offroad clearance and performance!
This bumper uses a total of 12 factory mounting points to solidly mount it to the frame and is available with an optional integrated skid plate for even more protection and strength. The mounting system distributes impact and winching forces evenly across your frame and makes for the stiffest mounting interface of any bumper on the market. This bumper also uses a low profile design that tucks tightly to the body and slopes up directly from the end of the frame. This results in maximum ground clearance and approach angles that will let you take lines on the trail that weren't previously possible.
The optional lower skid plate protects your vulnerable radiator, front differential and other lower engine bay parts and provides even more additional ground clearance compared to the flimsy stock skid plate. This skid plate also has side "wings" that sit in front of the notoriously exposed and low-hanging front suspension mounts. This will help prevent bent suspension mounts that can throw off your alignment and result in expensive repair bills. As can be seen in the pictures, this skid plate tucks extremely tight to the front end of the vehicle and gives a shocking amount of extra ground clearance where it counts most! Simply put, you will be able to take lines on the trail that previously were not possible with your stock bumper and skid plates. To finish it off, this skid plate has CNC cut outs that improve airflow to the radiator as well as raised sides that stiffen the skid plate and prevent debris from entering the engine bay from the sides.
In addition to the winch mount that accepts all standard 8-12,000lb winches, this bumper comes with 2 locations to mount 3x3" surface mount LED pod lights. These lighting mounts come with slotted mounting tabs that give a ton of adjustability to fit a wide range of different lights.
NOTE: Does NOT fit 2018-2020 front end. At this time, we do not offer a version to fit the 2018-2020 front end style or the factory parking sensor system but please reach out if you'd like to help us make it happen!
DIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent plates that you then weld together (detailed assembly instructions included)
NO Drilling, cutting or welding of the actual vehicle required - this bumper can be installed and removed from your F150 without a trace that it was ever there!
CNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product
Compatible with drop bracket lifts, standard suspension lifts, and body lifts (Optional Skid Plate requires modification for drop bracket lifts)
Low profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 3" from the center of the grill!
Heavy duty 3/16" plate steel construction for maximum offroad strength and durability
Optional 1/4" 5052 aluminum for a lightweight yet very durable overlanding setup (58lb weight savings)
Bolts directly to frame using a total of 12 factory mounting points - no drilling required
Protected winch mount fits all 8000-10,000lb winches with removable solenoids (Also fits some 12,000lb models)
Integrated 9/16" thick clevis mounts maximize clearance and allow the use of ¾” D-Rings
Two Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit just about any 3x3" surface mount pod light
Pre-drilled to mount front license plate
Optional heavy duty grill tubing for added protection
Key specifications
-
David Beaudet
-
Phillip Miller (ZomBud)
-
Gerry B
-
Eric T
-
RyFly